Magnetic Screen HEXAGONAL

MOSKERA Fly screen hexagonal (and special shapes) made to measure

A fly screen designed for openings with several sides : hexagon (6 sides) but also 5, 7, 8 sides (and more), diamond, trapezoid… Anything is possible on request. Fixing 100% hook-and-loop tape (suited to special shapes).

Multi-sided shapes Hook-and-loop fixing Premium made to measure 1. Hexagon… or any multi-sided shape

A hexagon usually has 6 sides, but we can make screens for shapes with 5, 7, 8 sides (or more), as well as other outlines: diamond, trapezoid, etc.

• Suited to unusual windows and design openings
• Clean, made-to-measure finish (no trimming "by hand")
• Manufactured from your measurements

2. Mostly windows, doors (possible)

In most cases this model is designed for a window (rare special shape). But if you have a multi-sided door , that is feasible too.

• Window: simple, made-to-measure configuration
• Door: a suitable opening can be added (on request)
• We adapt to how you use it

3. 100% hook-and-loop fixing

On special shapes, fitting is done with hook-and-loop tape only. It is the most reliable solution for following non-standard outlines.

• Clean fitting, no drilling
• Suitable for PVC / aluminum / wooden frames (depending on the surface)
• Follows corners and multiple sides

4. Opening: on request (if needed)

On a hexagonal window there is usually no central split. For certain uses (door, access, specific need), however, we can add: a magnetic central split and/or zippers positioned wherever you like.

• Magnetic central split: easy passage (mostly doors)
• Zippers: targeted opening, practical depending on use
• Everything can be customised on request

5. Symmetrical or not

If your shape is symmetrical, we can work from the overall dimensions. If it is not symmetrical (different sides), more detail will be needed.

• Symmetrical: we work from max width and height
• Not symmetrical: each side can be specified
• The more precise the information, the better the result

6. Ideal for

• Hexagonal (or multi-sided) windows in a house or conservatory
• Design openings: diamond, trapezoid, etc.
• Renovation projects and unusual openings
• Multi-sided door (rare): on request

Measurements required for the hexagonal / multi-sided model Hook-and-loop • Made to measure

The measurements needed to make your screen depend on your shape:

✅ Symmetrical shape (regular hexagon, symmetrical diamond, etc.)

• Maximum width (W max) : from the widest point to the widest point
• Maximum height (H max) : from the highest point to the lowest

From W max and H maxwe can work out the sides if the shape really is symmetrical.

✅ Non-symmetrical shape (different sides / different angles)

• Maximum width (W max)
• Maximum height (H max)
• Each side : measure and note the length of each side (S1, S2, S3…)

If possible, also state the order of the sides (for example, starting at the top, clockwise).

To state in the comments (if relevant)

• Type of opening : window (default) or door.
• Opening on request : magnetic central split (mostly doors), zippers (position).
• Exact shape : number of sides (5/6/7/8+), particularities, whether all sides are identical or not.
• Any useful information : fitting constraints, obstacle, handle, etc.

For more information, see the page "how to measure". 👇